Today stared out a horrible day, Hot, Bread, Zingalume

Today stared out a horrible day. In the morning my alarm didn’t go off so I woke up ≈80 minutes later then I had intended. As my 12v battery has not been holding a charge I needed to lug it to the BOMA along with my heavy backpack so what would have been slow going was slower going. I also decided to wear the pair of pants I had that the front pockets don’t snap down. About a third of the way there I realized a pill bottle containing my malaria medication had fallen out. Then about halfway there I realized my 8gb flash drive and two rechargeable batteries had fallen out. ARG! I hope someone picks them up.
This weekend I didn’t do that much because it was too hot (≈35-37°C). Even though it’s the rainy season it still seams humid as well although not as much as in Connecticut. Monday I baked some bread, first started out using my solar stove oven but it didn’t get quite hot enough to start the baking process. I finished it off using a new oven idea that is basically a pot big enough to cover my brazier. This worked well. I also went to Zingalume basic school and met with the teacher who is in charge of clubs to discuss trying to integrate the syllabus I worked on last month into the remainder of this term.

So here’s the plan / I have uploaded 1452 new ZamPic’s

2009-09-17
So here’s the plan: the cycle gets done tomorrow, I ride the heck out of it this weekend – I can’t bring it back the next because all of the staff are on a retreat somewhere, then on Monday, assuming that nothing has broken on the cycle, I’ll bring the think back to Chipata, then Chadiza. And this epic thing is done. It is going to be sweet to ride (I think, I hope).
Now that is the daytime news, the evening news is that I have uploaded 1452 new ZamPic’s (Pictures mu Zambia) onto my website. Check them out at: The Other Realm .

Well, I think I’ll go to bed

(2009-09-09, roughly 21:27 hours) – Well, I think I’ll go to bed

2009-09-10
Frustrating day, still have a lot to do on the cycle, working on bike cart design and some online stuff.

2009-09-11
Well, I won’t be going back this weekend, hopefully Tuesday or Wednesday next week. Right as I am typing this I have a pot full of oats in front of me – this is isn’t that important, I just thought you might want to know. Hopefully this weekend I will have time to put up my pictures. All for then…

I want to get out of Lusaka!

2009-09-07
I want to get out of Lusaka! At the same time I want to get my water wheel (and of course my cycle) done before I go back. But I need to deal with red (plus green, blue black and yellow) tape. Unfortunately none of it is duct.

2009-09-06
Finished solar stove – only problem is I don’t have a black pot. Still makes the water very hot though.

2009-09-05
Worked on making a solar stove most of the afternoon, right now trying to get my camera to connect to a PCHQ computer because the wireless router needs to be reset. I think the problem with the connection is with the USB port on the camera… which sucks because that means that capturing is basically impossible…

Today was a fair..ly successful day

2009-07-30
Today was a fair..ly successful day. After stopping at the design shop, I went to the Lusaka AG fair. The fairgrounds remind me a lot of the Big-E, only imagine what the Big-E would be like if it replaced the rides and game stands with more AG related things. In about 4-5 hours I found out more about renewable energy and remote internet then I have the entire time I have been researching the subjects. I met with this technology school based in the Copperbelt that had designed a bicycle that could run on solar power alone. The really useful part was when I asked where they had gotten the engine from and they said that it was from a windshield wiper. When I go back to Chipata (tomorrow actually, although I will be back here in a week or so) I will look into getting one of those little things and using it to do the reverse of what the school exhibiting was doing, make a generator out of it. Then I tracked down a digital system engineering company that it was rumored they were making low RPM generators. Although, from the previous stop I had found a almost certainly cheaper alterative to a new specialty device, I thought it wouldn’t hurt to talk to someone there. The company did not stock such a machine and was about to exit the building when I thought about asking him about ham radio. As it turns out, he is a licensed operator in S.A. Unfortunately he didn’t know how to get a license here, but when I stopped at ZNBC, they really liked the idea of an amateur radio program in local schools and got my contact information about getting a program under way in Chadiza. Finally, I was on my way out of the grounds when I stopped at the Zambia Meteorology Department. I overhead someone saying the word “internet” and my ears picked up. Apparently there is a device that is being distributed throughout Zambia and elsewhere in Sub Saharan Africa that is in essence a Short Wave Wi-Fi that is used for its own intranet. When I got back I Google’ed WorldSpace, the name on the top of the units they were using to connect. Initially I didn’t find anything until I found their not-for-profit arm. Essentially they are doing what I have been attempting to do for some time, bring low cost internet to remote villages. Check them out at: http://www.firstvoiceint.org . Alright, still have a lot to do before I get a brief rest and head out on the long trek back to Chipata.

CAD Waterwheel, WiFi, & cycle

Yesterday I spent the morning and first part of the after 1200 hours doing more research in long range wireless radio, then I switched to design and spent the rest of the night doing a CAD drawing of a water wheel pump and printing steps for making a stirling engine. Today I will hopefully be going to DisaCare to work on my cycle and to show them the work I was doing the previous day.

An update of ordinary magnitude

2009-07-02~2009-07-25
Week one(ish) of July (week of Forth of July, Unity Day, Hero’s Day) I was in Chipata spending some time relaxing after almost a month in the village as well as finding out how to make soap.
Week two (with a bit added on in the beginning and the end to bring the total up to day 18 of the seventh month of the ninth year of this millennium) I was back in the village doing two soap workshops. Probably my most rewarding workshop was working with the teacher in charge of the JETS club in finally getting the Solar Oven project under way. I also had several good conversations with the head teach, who I get along well with, resulting in asking whether he wanted me to work with the other teachers in doing some programming in the area of Inoviropreneurship (innovation, the environment and entrepreneurship). He liked the idea and when I asked him how much he wanted me to do he said that I should write a daily class for ten of the thirteen weeks in a semester. So I’ve been pacing myself in writing the fifty lessen plans.
On the eighteenth day I took a dreaded taxi to the city known as Chipata and spent a while working on beginning the structure of the syllabus. I also made pancakes for the first time since I’ve been here (and a long time before that) and also made some soya burgers that were really good, I just wished my stomach had been feeling better.
Then on the 21st, I headed down to Lusaka to finally get a cycle of sort. Of coarse the shop had not been notified when I would be coming and they were not all geared up to go. Hopefully they will be on Monday. I’ve been spending a lot of time getting hooked on Amateur/Ham radio. I think it would be awesome if I could get myself and a few local Chadizians’ licensed. Then we could communicate throughout the world. The summer CHIP/RAP (CHIP=community health improvement project, a combination of the old HAP/CAHP) intake of ’09 came late Thursday night and were at the PCHQ on Friday. They seem like a pretty good group. Alright, back to haming, pondering whether I should spend some time writing lessen plans and working on a CAD drawing of a portable waterwheel for irrigation I’m designing.

Minto Wonder Wheel

2009-06-24~2009-07-01

The 7 or 8 days (depending on how you look at it) have been almost as productive as the week before, it would have been as or even more productive as the weeks before this last week except that my back and left leg were complaining that I had been bending over and favoring my right side too much and so I didn’t do any more double digging or composting (although I was approached as to whether someone wanted them to help clear the field of weeds [for a fee of k20,000 for the large side, k15,000 for the small side of course] and they did what would have taken me probably a couple of weeks in a couple of days so I have plenty to compost when I return to the village). I did however make another go at banachar which I got many other villagers interested in and I think it was a success. That is of course contingent on the charballs that the villagers made sure were perfectly spherical burn better then the last ones I made but I think they will. Yesterday I successfully got a taxi to Chipata on the first try and they were only around 40 minutes late!

Tuesday was somewhat of a relax veg out day and I stated up too late watching movies (an ok movie about a Egyptian born engineer married to an American who gets kidnapped by the CIA and tortured because of a terrorist act he did not commit and Fight Club from beginning to end without being interrupted by the pesky parental party). Today I found an ingenious idea for a means of generating power using a small temperature variant. Basically the way it works is you have a bunch of tanks containing a fluid that easily converts into a gas arranged in a circle in such a way as to look like a big watermill (the circle turns). The opposing tanks are joined by a pipe and there is a source of heat in the bottom and something cooler on the top. When the liquid in the bottom is heated and turns to a gas, it rises up to the tube on the top. The tank on the top is cooler however and so the gas converts back to a liquid causing the tank on the top to spin downward towards the bottom and the tank on the top to spin upwards. Although the whole thing does not spin that fast, if you have a large enough circular structure, the torque is enough to give off a descent amount of energy. I am definitely going to build one, the only problem is finding a liquid that changes to a gas easily but is not supper flammable or toxic or both and not really rare. Most of the fluids I have found in that people are using are at least one of the above mentioned heal risks. I would use mercury I think if I was in the states and designing it for a large scale production but to put such a toxin in a place that A. there are almost as many iwe’s (children) as there are udzudzu (mosquitoes) this time of year B. most people have an innate need to take things apart and tinker with things C. there is a remarkable lack of mercury in Dovu village and lastly D. that probably most villagers have never seen mercury or have any idea what it is. Therefore I am in search of a fluid that meets the required specifications and is not dangerous or rare in Zambia. This challenge aside, I think the project has great potential to power villages all across Zambia for next to nothing in parts.

All for now, I’m still wondering why this inventive idea is not more widely known and utilized.

Peas, Compost, Solar Cooker, BanaChar, Hoe the day away PLUS… some other stuff

This last week, in all has been a slightly productive week. I planted some more peas, spinach and broccoli, made a Solar Cooker and was going to try it out on Saturday to cook beans but the day was cloudy. I also started a compost pile using the plentiful supply of cattle manure and made a test run of some “banachar” using mashed banana peels, charcoal dust and a little bit of sand. The test bio-charcoal should be ready in a few more days as they are not dry yet. Yesterday I spent aprox. 7 hours working on hoeing my big garden of weeds to get it ready for planting when either I get an irrigation system set up or the rains come. It will be a big process as I only got a small fraction of the field clear, the soil when dry is very hard clay and there is crab grass throughout most of it. Today I am in da BOMA using the internet and hopefully meeting with my forestry counterpart to talk about setting up two projects. One is collection of plastic bottles for use in drip irrigation and the other is clearing fields using biochar instead of open air burning that is very harmful to the environment and people’s health.